Press <Menu>, place the cursor on "Other Options" Press <Red Arrow> and <OK> /Frank

OK, thanks a lot Stefan /Frank

stefan: Hi Jes, I connected SCART Pin 8 (data) and Pin 21 (ground) to IR data input of the -238 box and it works. Tested it with MX 4000 and BV7-40. Connect your -238 box to Lintronic`s Memory map, and you can see the commands. Works also from linkrooms and in an MCL-system. I have a Relay 108 board connected to my MCL-system and it works. Hope this

Take a look here: http://www.beoworld.org/beotech/ /Frank

I would find me another dealer. /Frank

I live in Denmark and my dealer has a "magic stick" - a modified Beo4, to do the trick. It took less than a minute! /Frank

....mr anders(son): frankmj: What if you bypass the RF amplifier and press v.tape in the link room. Does the Video start? /Frank You must use RF amp. It´s only picture that goes there. All commands goes through ML I know, it was just to test the ML-connection, if that works, he has to look at the amp. and the connections to RF. /Frank

What if you bypass the RF amplifier and press v.tape in the link room. Does the Video start? /Frank

Then I would check the ML-cable and the junction box if you got any. /Frank

Check the connections menu on the MX4000. They should be set to none. /Frank