The power supply PCB should be around £40 from B&O.

beobuff: Thanks for the suggestion, but in the situation described, using the PMUTE function doesn't accomplish anything. Its purpose is to disable the video signal to the screen, but because there is no video source connected to the PS3, there is no signal to the screen anyway. However, the screen is still on and drawing current, albeit not as

beobuff: Yes, this will work just fine. I had a HD digital audio FM receiver connected via SPDIF to AV5 for a while. Of course, it had to be registered as a video source; the plasma screen was therefore turned on when AV5 was selected as the input, even though there was no video signal present. It got to be a nuisance having to turn the plasma off and

Have you thought about using the component inputs for your Sky HD box? that would leave your HDMI free for a DVD player. I would say that on that size screen, you would not see the difference between the two connections.

OK! firstly the scart is not there to power the IR blaster but it is important that it is connected. The TV detects that the STB is there via pin 8 of the scart cable, the TV sends a small voltage down pin 8 and if it does not get a reply then it assumes the STB is not there and sends an off command down the IR blaster. So in other words, if you do

The error mesages suggest that, that is all you need to do. However, a service engineer will have to do that for you.

VMEM: F8 40000104 8/04/08-20:18:23 RMP startup time out - DVDM SW bug, check for Master Unit SW update F8 74000000 8/04/08... out of DISP DD Telegrams - SW bug, check for Master Unit SW update A0 20060000 8/04/08... link OK and current master - no error NVMEM: F8 40000104 8/04/08-20:18:23. As with error 1 above I hope this helps

"F8" refers to an application error, if you can post the remaining digits of the error code I should be able to determine what the issue may be.

I have heard of this before, it doesn't happen on my Avant but did on a freinds BV5. It was explained to us that it was audio bleed through from (in his case) the Sky+ box he was using. There were at the time 3 options, set the STB to switch off when not in use,remove the appropriate pins from the scart plug at the Sky box end (I can't remember

Jandyt: 1. Beomaster 5000 tuner 2. Beolab 5000 amp 3. Beovox 5000 speakers 4. Beovox 2500 cubes 5. Beocord 2400 reel to reel All for £200 thanks to a fellow Beoworlder Andy T. Surely it was your BeoSystem 7000 for £30 courtesy of the BeoWorld prize draw Andy Mine was a complete and near perfect BeoSystem 6500 with MCP and RL 60.2's for