Of je moet dus iedere keer bij het aanzetten een SPEAKER 1 instructie geven. Omslachtig, maar het werkt.... Als geld een probleem is, koop je 2 6000's (nu rond de 700 euro te vinden) die je later als surroundspeaker kunt gebruiken. Dan kun je later altijd nog de duurdere 8000's of wat anders erbij kopen.

Welk type BV3 heb je? Een 28 of 32 inch? Typenummer staat achterop. Beobuddy.

Thanks Beogen for the invitation! There will be a time when I take the DVI module with me and visite you. This afternoon I've made a small video to show how the BV5 chassis controls the Panasonic panel. The quality isn't that good, but enough to get an impression. As you can see the videosignal stays the same and the panel gets the instruction

Should have read the link Keith supplied. I did hear something about this, but never looked any further for info. It could simplify the excisting situation. Less could be more in this case.

[quote user="Keith Saunders"] The link amplifier would normally be placed somewhere between the incoming analogue TV aerial and the Beovision 5. [/quote] Wouldn't that be behind the BV5? Otherwise you don't have the superposponed (sorry, don't know correct english term) signal from any source attached to the BV5. In my system I

That's an different issue you're entering. What about the warranty from Pioneer? Maybe you will succeed, but what to others? It isn't a plug and play solution. Ok, a stripped avant and some extra (selfmade) parts, but I also would try to keep the other equipment as original as possible. A Lintronic device could control sound through a build

Die beolink passive heeft toch een powerlinkaansluiting? Bij mijn weten kun je dan die beolink passive gebruiken als een externe versterker voor passieve boxen middels alleen een powerlinkkabel tussen de 2300 en de beolink passive.

You see! Gold membership, value for your money.

[quote user="enkhome"] Hi I used the existing amplifiers as is 4x15 watt (continue) so keeping the active crossover and feeding it with a additional powersupply. You can see it on a picture earlier provided. rgds. hans [/quote] As far as I can see in the manual is that pcb 10, the amplifier/cross filter board needs an active mute signal. That

[quote user="burantek"] [quote user="Alex"] I would want to integrate a BeoSystem 3, the difference in performance between the BeoSystem 1/2 and BeoSystem 3 is absolutely massive. [/quote] oh, i don't doubt that... but as the 8490 is basically "ready to go" out of the box, i see it as: extract the crt, plug a 15pin