I use a 50 Cm cable strip connected to the FM with an alligator clamp, works for me, but we have very good reception in my area, next step will be the rabbit ear and if that does not work, next step is an outdoor dedicated FM antenna.

Trim the rings Chris

[quote user="Eugene"]The MPSA13 is a small output darlinton (looks like a common transistor). You will find them on the heat sink adjacnet to your bigger output drivers. You will have two one for each channel.[/quote] There are two on the component side, bend through a hole in the PCB and "connected" to the darlingtons with heat

Hi Gunther I have the BD 697/8, but they were solder side and with plastic strip. I dont find the 0R47, but the 2R143 left 0.39 ohms, as i have the Darlingtons and the big caps out i checked all 4 0.39 ohms and they give me 0.40 ohms so they should be OK. Diodes 2D19 to 2D26 measured on print seemes Ok, but will desolder one side and check again, will

I have the same problem, but its normal, movies has long pases with very low or no sound, that does it, the link cables keep the speakers online, so to say, all of time when your Beo is turned on.

My wife is getting the Beovirus, she gave me a new box for my multitester, the multitester she gave me for Xmas, it must be the virus. The box design must be something for Eugine and Rich as they are into designs like these

I see the stand in 2 colors, is that original, the stand I have here is all black.

[quote user="Andre"]For being stupid, I think I will go and have two dozen Copenhagens and go and stand in the corner for a while.[/quote] Dont Andre, we are, compared to Martin and some other guys on the forum, all "stupid" or maybe just happy amateurs , keep going you are nearly there

I'm back in the saddle, got the lamps from Martin, and I only had to change them and change the direction of the mhz scale, an easy task. But as I in the mean time since I changed caps I have done my homework read al the forum threads about BM 901, got good advise from Martin and Eugine about how to and surfed the net, I, as the 901 was open, wanted

As Martin, I came across the listing and have not bought from this seller, I posted the link because you are over here and it would be easier for you to get it. As Martin explains, woodworks is a sience and only mastered with trial and test, if you want exactly the same grain and color, you are in for a job where you will have to check several different