The following video will interest cat lovers everywhere [Video]

It's not a matter of space, more an issue of software. You may wish to review the thread HERE from 2007 on the subject

You may also wish to view all the recent Central Europe updates HERE

The following are recent Central European "Chip" versions These are for older Beovisions with a STB-C where a physical "chip" must be replaced to upgrade the software Central Europe Version 4.02 Central Europe Version 4.06 Central Europe Version 4.12 Amstrad SKY HD I ASTON XENA 1600 Cablecom CCM 7100 Cablecom DCI52UPC02 CANAL+ PILOTIME

I am informed that the last few software updates for the Beolab 5 are as follows:- Version 3.00a is the latest, but apparantly cannot be used in older Beolab 5's meaning units with a serial number prior to 21221146 will never be able to have version 3.00a This means that members with units before the above serial number can only have their software

Andy, A very happy birthday from me as well. Have a great day....

I think the following list is what you may be looking for:- Many members in the UK will be particularly interested in the fact that the Virgin V+ is included in the list which was a pleasant surprise. West Europe 4.11 1. HUMAX Cl-51 OOC 2. Humax IRHD-5000C 3. Humax IR-FOX C 4. Humax IPVR 9200C 5. HUMAX PVR 9200T 6. HUMAX HDCI-2000 7. Philips DCR 1211

Nick, I suggest you try and get a Mark II model and replacement covers can be purchased for around £15 Covers are available for both versions and are basically the same.

I did some further research and looked at the available commands for the boxes you mentioned and I have listed them below. HDCI 2000 FREESAT HD FOX 1=0 2=1 3=2 4=3 5=4 6=5 7=6 8=7 9=8 10=9 11=Power 12=Up 13=Down 14=Left 15=Right 16=OK 17=TVradio 18=Source 19=EPG 20=OPT 21=Back 22=Last 23=Red 24=Green 25=Yellow 26=Blue 27=PPlus 28=PMinus 29=VMinus 30

Graham, I have had a quick look at the circuit setup and you problem will be less with the hardware, but the software would be your problem and one you would not be able to resolve. May I suggest you get a pre-owned DVD1 and plug it into one of the SCART sockets, then you have the solution and fully controlled with the Beo4