Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Search

Page 10 of 16 (159 items) « First ... < Previous 8 9 10 11 12 Next > ... Last »
  • Re: Ebay warning for sellers

    I too am a little confused. The two accounts you refer to have nearly 2500 positive feedbacks and only one negative in the last 12 months. Did the scams to which you refer happen more than 12 months ago or has the negative feedback been removed? Richard
    Posted to eBay - the right way! (Forum) by richtoy on 08-07-2009
  • Richard's Collection 3 - The listening area

    The BeoMasters drive the Beovox Pentas
    Posted to Your Set-Ups (MediaGallery) by richtoy on 07-26-2009
  • Richard's Collection 2

    As collection 1 but now with some of the other BeoMasters that can be substituted.
    Posted to Your Set-Ups (MediaGallery) by richtoy on 07-26-2009
  • Richard's Collection 1

    The default setup consisting of BeoMaster 8000, BeoGram CDX, BeoCord 9000 & BeoGram 8002 on Attyca 1 & Attyca 2
    Posted to Your Set-Ups (MediaGallery) by richtoy on 07-26-2009
  • Re: Beomaster 1600 Problem

    Hi Menahem I have just brought a Tektronix 2465BCT, it's a fine oscilloscope as stated here: - http://www.amplifier.cd/Test_Equipment/Tektronix/Tektronix_other/2465B.htm If mine goes wrong I'll know who to come to... What equipment do you use for setting up RF & IF stages? One of the BM6000 Quads that I have has been "adjusted"
    Posted to The Workbench (Forum) by richtoy on 07-26-2009
  • Re: Beocenter 9000 help needed for setting options

    I tend to agree with Ulf. I have just connected a BC9000 to my BV3/32 via a Beolink converter and have the problem that selecting any radio station except 11 (1 twice) is impossible. I then obscured the ir sensor on the BC9000 and hey presto everything appears to work as expected The BV3/32 has a surround module which is driving a pair of BL8000 and
    Posted to General Forum (Forum) by richtoy on 07-06-2009
  • Re: PSU problem on BV3/32

    Hi Lee We had a really good trip and just about got all we came over for. I don't think it is the tube. It now has a hard PSU fault. The PSU makes no attempt to startup and even starting in bus-ignore node make no difference. I checked the tube for shorts and there are none and the heater filament is 4 ohms. It's something to play with for a
    Posted to The Workbench (Forum) by richtoy on 06-14-2009
  • PSU problem on BV3/32

    I have just purchased a known defective BV3/32 for its Surround module & STB/C but am also considering a repair if if won't cost more than the TV is actually worth When you press TV the standby light goes to green but there is no sound or picture and you have to remove power lead from the set to put it back into standby. The TV worked briefly
    Posted to The Workbench (Forum) by richtoy on 06-14-2009
  • Re: Need a Beomaster 3000-2 Volume Slider

    I have those too. PM me with your address and I will drop one in the post. Richard
    Posted to BeoWorld Private Wanted (Forum) by richtoy on 06-14-2009
  • Re: Need a Beomaster 3000-2 Volume Slider

    Hi, I may be able to help. You should really ask for the one that is broken because they are not all the same value and one or two are logarithmic. Volume, Balance & Treble are 20K whereas Bass is 50K Volume & probably also Balance are logarithmic whereas Bass & Treble are linear Richard
    Posted to BeoWorld Private Wanted (Forum) by richtoy on 06-14-2009
Page 10 of 16 (159 items) « First ... < Previous 8 9 10 11 12 Next > ... Last »