It has been a pleasure having been of help to you. hfat

Hi, Yes this is one of the limitations HD sources put on some funcitons. I also often forget. (Reference book page 66). To check the sound menu you will have to temporarely disactivate the HD source definition. Then the menu should be displayed. After checking sound, you reactivate HD source defintion. hfat

Hi, You press MENU to enter the setup menu (perhaps you have to press menu twice if an setop box controller is active) the menu appears you have to select "options", press GO there you select "Sound", press GO the sound menu appears, the last option is "sound system", which you can now select and press GO. the following

You can chreck the sound input by accessing the sound menu. When your v.mem source is active you have to enter the sound menu and activate the option "sound system". This displays information about which sound format ist received and how ist is being outputted to the speaker. hfat

Hi, The coax should be running to A1. Did you register the audio input A1 in the AV1 setup dialog? Audio socket: A1 You can check the sound processing by accessing setup sound/sound system, which displays sound input and processing options. hfat

Thank You, beobuddy. I now found it. hfat

Ganz so elegant wie bei den Radio und TV Sendern geht das nicht. Aber NRadio lässt sich ebenfalls über die Zifferntasten steuern. Du musst auf der BM1 bzw. N.Radio-Seite eine Sub-Seite anlegen. Auf der kannst du deine Lieblingssender als Taste anlegen. IR Kommando <NR>+GO. hfat

Hi, Great that you've got it working. @beobuddy: which manual did you take the pic DVI installation from? I've looked through all my BS2/BV4 manuals and could not find it. hfat

Hi, Have a look at the spec: http://www.bang-olufsen.com/product-archive?ProductType=BeoVision&ProductName=BeoVision%204%20-%2050%20EU could this be your problem? Pixel count1,049,088 pixels (1366 × 768 × R, G, B) Try 720p resolution. hfat

HI, I think you have no choice. I simply don't know if the documentation is wrong or it's imply a case of different SW versions. If you want to access your PC via PC command, you have to use the source definition BS2 offers. On my BS2 PC(DVI) is offered on the decoder socket, dispite of the fact that the manual states ist's available on