Hi Keith, I've had the set for nearly a year now and it has always been like this (I've been trying to find out on and off what the problem is since then). This sounds expensive - I wonder if this is why such a new set was passed on!!! I think I may have been done. I'm not having a lot of luck with TVs these days, the main reason I went

Right here is a picture from todays weather... (it was taken at 1/60 so there should only be 1 frame (2 at most) here). have a look at http://picasaweb.google.co.uk/jezzastone/BOPicture1/photo#5080439040253933282 I'm having trouble inserting the picture inline. As you can see, subsequent frames seem to be separated by half a characters width - e

Cheers again guys, I will try and get that photo. The problem isn't realted to channel (that I am aware of) so much as program - I've had problems on BBC1 / ITV (which I'd expect to get as much bandwidth as any those being the main 2 TV channels in the UK) as well as on terrestrial analogue (I think, but need to confirm). I've been trying

thanks guys, To answer the questions I'm not sure how old the set is tbh - it's 'pre-owned'. Its a type 8813 s/w version 13 according to the sticker on the back and the monitor information on the menu. I take the point about 100Hz, however don't think this should explain the problem - my previous set (a Loewe Acconda until the tube

What are you looking for in the picture to se if it’s RGB or CVBS that’s on ? If you go into the service menu, Monitor, Picture adjustment, Colour adjust, it (presumably) tells you what it is using (CVBS 043), I can also flip to the other setting RGB 064 which does change the picture.If you go into e.g. the program guide on the STB (loads

I think thats on the Beolink 1000, I have the Beo 4 - or is that accessed possibly from a hidden list menu? Thanks, Jeddy

Firstly yes, 32". ok, so I cut the wires going to pins 19 and 20. I still get sound but I'm now getting funny things happening with the picture - by which I mean sometimes it looks like the horizontal hold has gone (picture scrolling right to left) and other times you can't even work out what the picture is (diagonal lines of colours on

Well the problem is on more than the STB (scart 1 from Inverto PVR) as scart 2 (Tivo which is also setup to send out both) does the same thing. I'm also suspicious about the set as I can tell the difference in the picture when I manually go to RGB, it just doesn't maintain the setting - it's not like it isn't even working when I manually

Thanks Keith, Meter out, cable checked, all wires appear to be present and correct, each pin on one end connects to a pin on the other end. Is there anything else I could be doing wrong, could this be a s/w version issue or do I potentially have a h/w problem with my set? Many thanks, Jeddy

Maybe a silly question, but did you press GO to store the setting before leaving the menu? There's no such thing as a silly question when you are trying to help somone who doesn't know much! Indeed I have tried selecting RGB and then selecting Go and then List / Exit to get back out of the service menu but to no avail. I would suggest you check