in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
All Tags » repair (RSS)
  • Re: Beogram 8000 repair

    Hi, I’m not sure I can help because I have a similar problem. I am also the original owner of this unit and have had mine packed away for 6 years. I just hooked it up today and was not happy when the platter refused to rotate. I’ve got the user’s guide packed away in another box somewhere...
    Posted to Vintage Products (Forum) by PapaBear on 11-05-2009
  • beolab 8000 tweeters

    I have beolab 8000 speakers about 12 years old, they have been in for repair several times in their lifetime. When I remove front grill and place my hand on the tweeters ( on either speaker ) there does not appear to be any vibration. Are the tweeters blown and if so can I replace them myself or do I...
    Posted to General Forum (Forum) by patrickmulholland on 10-21-2009
  • Engineers Where Art Thou ?

    Has anyone compiled a list of Vintage B&O engineers By virtue that our collections are in excess of 25 yrs old - these demi-gods are sure to be getting scarcer and scarcer. I am reluctant to pass anything made of metal or wood to the ipod generation to service. I have a CDX that needs a tweak and...
    Posted to Vintage Products (Forum) by NathanS on 08-19-2009
  • Help needed to remplace belts on a BeoCord 5000/Aide au remplacement des courroies d'un BeoCord 5000

    Hello, I'm a french B&O lovers that have a beosystem 5000 and I have some problems with my BeoCord 5000 cassette deck. I have faulty belt, when I open my BeoCord I find small broken belts parts into it, but not enough to know where they were at the beginning when it run propertly. I've already...
    Posted to General Forum (Forum) by Abou58 on 08-05-2009
  • PSU problem on BV3/32

    I have just purchased a known defective BV3/32 for its Surround module & STB/C but am also considering a repair if if won't cost more than the TV is actually worth When you press TV the standby light goes to green but there is no sound or picture and you have to remove power lead from the set...
    Posted to The Workbench (Forum) by richtoy on 06-14-2009
  • Front touch panel fell out of my Beomaster 4500!

    Has anyone had this problem? Or better still, fixed it? The front panel on my 4500 amp/tuner has become detached from the unit. It was attached with some sort of rubberised gasket, not glue, and I'm wondering how to reattach it. Any advice welcome.
    Posted to General Forum (Forum) by wootha on 06-08-2009
  • Need help with Beocenter AV5 will not enter the MENU

    Hallo, I need help. I bought some Beocenter AV5 from a hotel here in Stockholm where they said to me that device makers are ordinary consumer TV, s but now it appeared that it did not come in (Menu) via remote control, could someone tell me why I can not may come into menu? Are they perhaps the hotel...
    Posted to The Workbench (Forum) by BegBeo on 05-05-2009
  • replacement glass panel for Beocenter 9x00

    Hello there, The glass panels of my Beocenter 9000 have come loose. I wondered if there are still replacement parts available, as I think the glass panel for the BC 9300 is the same as the one of the BC9000? Anyone knows the part number, or better still, has a glass panel for sale?
    Posted to The Workbench (Forum) by apopboy on 04-20-2009
  • Re: Bang & Olufsen Red Line Authentic DIY ABR (Auxiliary Bass Radiators) Successful Repair

    Hi... or could I say "Hej"? Er du dansker? I'm from Denmark, Humlebæk north of Copenhagen. I've just had a pair of Redline 45 for free together with a Beocenter 7700 and a Beogram CD 3500. I'm having the same trouble as everyone else with the rottening foam in the bassport...
    Posted to The Workbench (Forum) by shwaya on 04-20-2009
  • Bang & Olufsen Red Line Authentic DIY ABR (Auxiliary Bass Radiators) Successful Repair

    Design concept failure As we all know, after about 15 or so years the foam used in B&O & many other manufacturers speakers turns to mush, cones fall away, speakers become seemingly useless. A market has arisen providing a readily available supply of replacement foam rubber rings, and appropriate...
    Posted to The Workbench (Forum) by BeoMatt on 03-11-2009
Page 4 of 7 (63 items) « First ... < Previous 2 3 4 5 6 Next > ... Last »