in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
All Tags » repair (RSS)
  • Redline 140 floor stands repaint?

    I am starting to restore a pair of redline 140s and the stands have quite a bit of rust and paint missing. Does anyone have any ideas how I could repaint to either a very similar finish to the original, or something that would look suitable for the black redlines? Any ideas appreciated.
    Posted to The Workbench (Forum) by Jimburg on 02-26-2012
  • Attyca 1 project

    My attyca 1 is in need of renovation. The bench has a scratched edge . Has anyone tried to restoring an attyca bench with a scratched edge ? Do you have any good ideas to restore the edge ? I'm thinking of putting an angled sheet of brushed aluminum or stainless steel.
    Posted to The Workbench (Forum) by Krona on 02-19-2012
  • MCL/Masterlink - Fehlersuche und -Behebung

    Ich habe mehrere IR-Empfänger im Haus, die über MCL an ein MCL2P angebunden sind. Das MCL2P ist über Masterlink an eine Ouvertüre angeschlossen. Jetzt funktioniert auf einmal die Steuerung des Systems über die IR-Empfänger mit der Beo 4 nicht mehr. Signale der Beo 4 werden...
    Posted to Deutsche BeoWorld (Forum) by wolferich on 02-11-2012
  • Re: Beocom 6000 Replacement Battery

    Does anyone have an online source for the original equipment B&O part? I'm willing to buy OEM, but don't want to have hunt down a dealer. Also: what did you pay for your battery? Has anyone disassembled the OEM battery and can post pictures of the difference from the aftermarket models?
    Posted to General Forum (Forum) by brycenesbitt on 01-27-2012
  • Front Panel Fonts

    I am working on restoring a Beomaster 1700 amp, and would like to be able to be able to repair damage to the printing on the slider controls and front panel. What fonts did B&O use in their designs, and do members have any recommendations or tips for restoring damaged front panels? It seems to be...
    Posted to The Workbench (Forum) by ormej01 on 01-11-2012
  • Beolab 2500 - Voltage Problem

    Hi Guys, I've just joined and am starting off with problems !!! - I have inherited a pair of Beolab 2500 speakers, but they are set for 120V and not for 240V supply - I've been doing a bit of reading on this forum and there are some posts which say that the transformer can deal with both inputs...
    Posted to The Workbench (Forum) by Crawford on 12-18-2011
  • Re: BEOMASTER 901 repair help

    I have been trying to locate someone who can help me with this ... local to me.. but really struggling. Is there anyone in Northamptonshire or surrounding counties handy with a soldering iron? :) I wanted to put some pictures of my B&O system up to but can't sem to load them .. is there a knack...
    Posted to Vintage Products (Forum) by James on 10-10-2011
  • Loose glass plate on BS 9000

    Hi, Calling out to all of my fellow B&O-lovers who have a better knowledge than I possess of the technical side of this piece of machinery. The issue is the following: I have been offered to purchase a used BS 9000 with a loose glass plate. Now, how damaging is this, i.e. how difficult is it to repair...
    Posted to General Forum (Forum) by Milton78 on 06-20-2011
  • Beocenter 9300/2300 sparepart

    Does any have the Qudratur-detector coil (Pos L8- order-no 8022327) from FM/AM-board (01, order-no 8001413) or a defect FM/AM-board ??
    Posted to The Workbench (Forum) by Per Nørreslet on 06-19-2011
  • Repairing a Beolit 707

    On the other day, i spotted a nice Beolit 707 on the auction site. I won and waited for the nice classic item to come to my hands. The seller stated that the radio was fully working. After some days it was there. Cosmetically as described (in a very very good condition i must say). Unfortunately when...
    Posted to The Workbench (Forum) by DrDimitris on 05-29-2011
Page 1 of 7 (63 items) 1 2 3 4 5 Next > ... Last »