Dear all, I am a relatively new B&O fan, and I wondered if someone could help me out with a few questions about how things work and what I'll need. I would like to connect my curtains, lighting, audio and video using a masterlink connection after seing the rather inspiring video on the B&O...

[quote user="olvisab"]Cat 6 should be enough, don't you think[/quote] Cat 6 or 7 is of no importace as long you are using the cable for analog MasterLink or PowerLink. But the layout (construction) of the cable is very important! You need a screened / shielded cable + each twisted pair...

Well, here is the init draft of the unit placement in the current building; the image shows (from top down) 2nd floor, first floor and the tiny basement. The plan is to wire up the house with a star network using double CAT7 cabling to be used for Ethernet and BeoNet; then the idea was to wire up one...

The Cat7/Class F New Installation Concept Handbook will answer most of your questions ... http://www.abo-center.dk/Abo_center_2/reptips/diagrammer/Link/Cat7%20New%20B&onet%20handbook.pdf

Hi guys, "A true and horrible tale from a dane with the dream of a new speaker." Finally I found it! A fairly new, but used, Beolab 3500 for my kitchen. I've been looking for one at a reasonable price for some time now, and finally it was there. Even my girlfriend loves the design. And...

I have a Humax 9200 Digital Terrestrial receiver connected to an Avant with STB-C, and I can select programmes on this from a MasterLinked MX4002. However, the Humax includes a hard disk, in order to record programmes. To play these recordings on the Avant, I have to select <MENU><1> and...

I've been trying to use MasterLink for the first time, and seem to be *almost* there. My problem is incorrect aspect ratio when displaying widescreen data from the Avant on the MX4002. The Video Master is an Avant RF VCR, with DVD1 attached to the AV port, and a Humax 9200 Digital Terrestrial box...

Hello all, Earlier today I purchased a Masterlink Gateway to work with my B&O products. No manual followed, I've plugged the different cables in, connected by an ethernet cable. Lights up green - seems to be ok. But when I try to access my router configuration page to see if the Masterlink Gateway...

Hi, I have three MX4000's, two of them have a UHF input problem i want to fix - the cable has to be "jiggled" about in the UHF socket (of the TV) when TV / Sat or DVD is selected, or the picture is noise and sound is hissing. Anything coming through the UHF cable does this, radio and CD...

I want to rewire my Masterlink system with the newer RJ45 connectors. Does anyone have the approved connection pin details for distributing Masterlink via RJ45, as there seems to be a shortage of pins on the connector to supply all the required cable links. Ron