|
Untitled Page
ARCHIVED FORUM -- April 2007 to March 2012 READ ONLY FORUM
This is the first Archived Forum which was active between 17th April 2007 and
1st March February 2012
Browse Forum Posts by Tags
All Tags » Masterlink » Beolink ( RSS)
-
Hello, I know that there are a number of posts already regarding the new BEONET (not released yet?) and the existing Lexcom Home product. Both seem very similar but Lexcom use a non-standard cable correct? I have read the Cat7 New BO Installation Manual and it does say that both systems are approved...
-
Ich habe die selbe Frage, aber eine etwas andere Aufstellung: Hauptraum: BV7-40 mit DTV ab Settop Box und BeoSound 9000 Nebenraum: MX6000 mit BeoLink Converter 1611 SW 1.3 (dieser TV mit BeoLink Converter war früher im Haptraum anstelle des BV7) Linkraum: BeoLink Passiv Wenn ich im Linkraum DTV...
-
I understand that the Beosystem AV9000 powers the AV9000 Audio Kit via the MasterLink cable, and that it is the only B&O product to do this (the other BeoLink boxes having built-in power supplies). However, the BeoTech minisite just shows a single MasterLink pinout. Would I be correct in thinking...
-
Great fun reading the forums! Started buying B&O stuff back in the 80ies and by now my house is "well equipped" (my wife would use more profane words).... But, I have really never been able to crack the Link Option logic, given that there is one ;-) Anyway, in this case I have - a BeoSystem3...
-
Hello I have a Beocenter 1 from 2005 (Typ no: 8523, SW:2.5, Acc: ML STB DSS) in one room connected to a Pace twin turner PVR , a VX7000 VHS and with a ML cable to the Beoport (SW: 4.65). I have recently got B&O to connected these products with my Beosound 9000 (SW:2.21) (with a ML cable) and BeoLab...
-
Hi , I have a Beosound 9000 with beolab 8000's connected directly with powerlink cables. i have recently connected a beolink active box and a pair of Pentas in a separate room. I cannot get the pentas to fire up whatever i try. i have set the link room to option 6 on the L.OPT. the IR module responds...
-
Hi, I am hoping someone with some practical experience may be able to help with a little issue I have with my BeoLink system. I am using a BeoVision 9 as the video master, I also have all of the video inputs (yes all 6) being used. I have the BV9 master linked throughout my home so that I can recieve...
-
I am seeking assistance with integrating my BV 7-40 with my BS 7000 which is controlling two additional link rooms through MCL. I have a ML/MCL converter (1651) connected to the Beovision through an ML cable and to the Beomaster 7000 through an A/V Link cable using the Power Link socket on the converter...
Page 1 of 1 (8 items)
|
|
|