General Forum

Re: beomaster 5000

jam57 — Mon, 21 Feb 2011 18:23:31 GMT

Do you have the the matching Master Control Panel; if so can you equalize the balance that way? If not it may be in need of some new capacitors, well worth the investment.

Re: beomaster 5000

airlock — Mon, 21 Feb 2011 18:12:06 GMT

doesn't seem to help it, there still a hell of a lot quieter.

Re: beomaster 5000

jam57 — Mon, 21 Feb 2011 17:14:25 GMT

Try opening the control panel and then press NEUTRAL. This will return balance to neutral and also sets tone controls to flat. Welcome to Beoworld.

John

Re: beomaster 5000

airlock — Mon, 21 Feb 2011 16:59:29 GMT

thanks guys this seems to have got them working, however the right hand side are running considerably quieter then the left hand...any ideas?

Re: beomaster 5000

Doctor — Mon, 21 Feb 2011 16:19:24 GMT

Which one works?!! You can certainly run 4 speakers - the system is actually designed so it can run a houseful with the right equipment. If only speaker 2 works, either speaker one is muted (you cannot mute speaker 2) or the mute relay is stuck - a common problem! Try attaching the speakers to speaker one and press the right hand coner of the amplifier - where it says mute. That should un-mute it!!

Re: beomaster 5000

Craig — Mon, 21 Feb 2011 16:17:00 GMT

airlock:

hi girls and girls new member here with a quick question. i currently have a beomaster 5000 with 2 beovox s55 speakers, however as i have another 2 kicking around is it at all possible to run 4 speakers from the beomaster 5000? i see it has 4 sockets but only one set seem to work, any help would be great, thanks in advance.

Hi, and welcome to Beoworld. Yes, your BM5000 can run 4 speakers. Try pressing MUTE on and off a few times. You may a stuck muting relay. These only work on one pair of speakers. So that may be your problem.

Craig

beomaster 5000

airlock — Mon, 21 Feb 2011 16:00:55 GMT

hi guys and girls new member here with a quick question. i currently have a beomaster 5000 with 2 beovox s55 speakers, however as i have another 2 kicking around is it at all possible to run 4 speakers from the beomaster 5000? i see it has 4 sockets but only one set seem to work, any help would be great, thanks in advance.