in Search
Untitled Page

ARCHIVED FORUM -- April 2007 to March 2012
READ ONLY FORUM

This is the first Archived Forum which was active between 17th April 2007 and 1st March February 2012

 

Latest post 07-07-2011 1:17 PM by jepp. 0 replies.
Page 1 of 1 (1 items)
Sort Posts: Previous Next
  • 07-07-2011 1:17 PM

    • jepp
    • Not Ranked
    • Joined on 06-06-2011
    • Posts 8
    • Silver Member

    beocenter 9500, passive HP, MCL2P question

    I plan my new house sound system around a beocenter 9500 rebuild with an ipod inside

     

    Then, because my living room is quite big I want 4 HP.

    I try that:

    I plug two HP on the standard passive of the BC9500 and  plug one  MCL2P on one of the power link 1 for the two other HP

    Alas each time I put the BC9500, I here a big crack as soon as the MCL2P receive power then it's work normally.

    is there a way to avoid the crack ?

    is it better to plug the 4 hp in parallele, 2 by 2 ? (I have only passive HP like P45, CX50, CX100....

    (just for info there will be above that a 4 rooms MCL linkage with two MCL 2A and 2 MCL2AV+MCL2P)

     

    thanks for your advise.

     

    Francois (France)

    I

Page 1 of 1 (1 items)